Spring in the workshop with IGM: inspiration, special offers and equipment for everyday work 

We Donated a Set of Router Bits to the Secondary Technical School of Woodworking and Construction in Krásno nad Kysucou

At the Secondary Technical School of Woodworking and Construction in Krásno nad Kysucou, we showed students the differences in the quality of router bits. We explained the most common routing mistakes, why it is important to understand material behavior, and how much the quality of the cutting tool matters. At the same time, we left the school a set of router bits for practical training.

💪Robust construction for professional use

• Rugged pillar designed for woodwork.
• Fast and easy speed change.
• Drilling depth up to 127 mm.
• High-quality keyless chuck.
• Integrated depth stops for accurate work.
• Large, versatile cast-iron table with T-slots.
• LED work light and guiding XACTA-X laser.

 

JET JDP-17 is a bench pillar drill specially construed for woodwork. Key features include a full 127mm of quill travel with one turn of the handle, with an integrated depth stop for repeat accuracy of drilling depth. Efficient, Poly-V drive belts provide smooth, vibration-free run with maximum power transmission.

The M101 straight router bit with two carbide flutes is designed for routing from the edge of a material. For example, when cutting grooves, tenons, and rabbets. Can be used in both hand-held and CNC routers. The M101 bit has both the cutting edge and the body made of carbide (HWM).

The M141 finger pull bit with two carbide flutes is designed for creating wooden handles and knobs. Can be used in both hand-held and CNC routers.

This finger pull bit allows you to make the handle from the same material as a drawer front or cabinet door.

 

The M170 Diamond Cutters are designed for all types of CNC machines. Can be used in a router up to 12 mm diameter. Cutter life is approximately 50x longer than that of a standard tool with carbide HM edges. 

 

 

 

🫵The ideal choice for demanding craftsmen

Professional LAGUNA Fusion2 table saw for wood for smaller workshops with 13A breaker, a digital angle display, compatible with DADO blades.

 

• Polished cast iron table.
• Digital read-out in the cabinet indicating saw blade angle.
• Redesigned mitre fence with ultra precise slide.
• Lockable cast iron control wheels.
• Smooth and simple tilt and height control.
• Cam lock for quick blade swap.
• Quick-release riving knife mechanism.
• Two T-slots on both sides of the saw blade.
• Can be used with DADO grooving saw blade set.
• Rear table extension included.
• Solid cast iron motor suspension.
• Movable ON/OFF switch.

• High strength water-resistant glue.
• Ideal for interior and exterior use.
• D3 Water resistant.
• Strong initial tack with fast setting.

Titebond II Premium Wood Glue is the only leading brand, one-part wood glue that even passes the strict EN 204 D3 water-resistance specification.

• For rip cuts.
• Orange Shield Coating surface.
• Carbide teeth with chip limiters.

Saw blade with alternate top bevel carbide teeth for rip cuts in hardwood and softwood. Orange Shield Coating teflon surface provides high corrosion resistance and better heat diffusion while reducing sawdust and resin build-up.

• Anodized duralumin ruler, durable and resistant to corrosion.
• Easy to read lasered scales in 1 mm increments.
• Two scales – regular and one with zero in the middle.
• Massive, rigid construction of the ruler.

• The hook stop can be mounted on both ends.

 

 

 

💡Perfectly sharpened tools for everyday work

• Grinding wheel 250 mm.
• Speed regulation.
• Number of accessories included.
• Large selection of optional accessories.

A very effective wet sharpener. The lower portion of the grindstone runs in a bath of water, this secures cooling and eliminates the risk of overheating. Robust and powerful engine with a gradual rotation regulation of 90-150rpm.

• Turning of hollow vessels.
• Simple and comfortable to use.
• Steady when turning.
• Rotatable carbide tip.
• Sturdy beech handle and chrome plated steel neck.

 

IGM Chrome Woodturning Hollower is used to turn hollow vessels, especially ones that have a narrow neck. Used on a lathe, the hollower is suitable for both beginners and professional turners.

• Forged blade made of high alloy steel with hardness of 60 HRC.
• Perfectly polished steel surface for smooth material removal.
• Fine ground blade with a 25° bevel.

Excellent IGM Bevel Edge Chisel for woodworkers who appreciate quality and traditional workmanship.

 

 

• IGM Clamp and Spreader with aluminum jaws.
• Jaw depth 95 mm.
• Large pads 90x36 mm.
• Simple and quick one-handed clamping.

IGM ALU Clamp & Spreader is designed for professionals and DIY hobbyists who need a robust clamp in their workshop. 

 

 

 

Listed prices are in CZK excluding VAT and the offer is valid until 31. 05. 2026 or while stocks last.

All rights reserved and prices are subject to change. 
Copyright © 2026 | IGM nástroje a stroje s.r.o. | Company ID: 25114727 
Ke Kopanině 560, 252 67 Tuchoměřice, Prague-West, Czech Republic