Clean Air Will Be Ensured by Reliable Laguna and JET Dust Collectors With IGM Accessories

The Most Efficient Collector in the IGM Laguna Flux Range.

• Separate motor for automatic HEPA filter cleaning.
• Efficient cyclone technology with two-stage filtration.
• HEPA filter with efficiency of up to 99,2 % of particles over 0,4 microns.
• 40% larger drum with a window and LED light for visual check of waste level.

Compact and very effective dust collector for small woodshops.

• Effective filtration of 99,77 % of particles at
1 micron.
• Robust and stable build.
• Low noise level.
• Robust metal ventilator.
• Handy filter cleaning crank system.

• Particle separation technology with the efficiency of up to 98 %.
• T-splitter included.

Rugged and high-quality dust collector designed for extraction from up to 2 machines. It comes with a powerful motor and a specially designed air fan providing high performance and a quiet run without any vibrations. 

• Three speed settings.
• Use with your dust extractor.
• Equiped with an electrostatic pre-filter.
• Filters can be carefully vacuum cleaned, or easily replaced.

The unit can be positioned anywhere in the workshop, either on a bench, a shelf or suspended from the ceiling.

Dust Separator IGM STO-P100

• More efficient extraction.
• Extends life of hoses and dust collector.
• Optimal airflow.

Maximize the efficiency of your dust collection system with IGM Dust Separator 100 mm. The Separator cleans the flowing air by deflecting rough dust, chips and large debris down into a bin, reducing damage to your dust collection system.

High-quality PU (polyurethane) 102 mm transparent flexible suction hose in lengths of 2.5 m, 5 m or 10 m. It is reinforced with copper-plated steel spiral and is ideal for extraction of chips and sawdust, with one mobile extractor from different machines in your workshop. Can be used for an outlet approximately 100m in diameter. Supplied in a compressed state.
 

• Quick connection of the extraction hose.
• Strong magnets provide a firm connection.

IGM Quick Hose Connector is used to connect or disconnect hoses with a diameter of 100mm, making it simple to quickly switch between your machine and dust collector. Supplied with two fixing clips for permanent attachment to a hose of dust collector.

IGM Quick Hose Connector as a New Product on Our E-shop

IGM STO-P100 Dust Separator Can Be Found in Our E-shop

• Fitted with a locking screw.
• Blocks far more efficiently than a plastic blast gate.

The aluminium blast gate is safe and prevents from static electricity generation far more efficiently than a plastic one with an earthing screw.

• 5 different sizes.
• Simply cut sections required with a fine toothed saw.
• Can form two or more adaptors.

A stepped ABS hose adaptor with 5 different sizes that can form perhaps 2 or more adaptors.
  

• Can be connected to any dust extraction cover.
• Quick to install.

The adapter can be used in a number of ways. Its main task is to connect the suction pipes towards the suctioned space or onto any cover.

• Fits 100 mm extraction hose.
• Easy to use, no tools required.
• Single-handed operation.

These handy hose clips allow the quick changing of a 100 mm dust extraction hose from one machine to another.

• Effective floor waste gulper. 
• Simply connects to an extractor with a length of 100mm hose.
• For large waste & finer dust.

Get rid of all dust and wood shavings in your workshop with this handy attachment.

The Floor sweeper is a cheap solution for the extraction and cleaning of the floor. It is specially designed for small workshops or for machines that do not have their own extraction and when the chips fall freely on the ground. Can be easily attached to the floor by double sided tape and connected to a suction hose 100mm.

Keep Your Workshop Dust-free

Airborne dust particles are the greatest and most common enemy of every woodworker and DIYer working with wood. Not only for lungs, but also for the work itself.

Fine dust is produced particularly when sanding, but also when cutting, routing or planing wood.

Do you have a question, do you need advice on something?
Do not hesitate to contact us by e-mail at sales@igmtools.com or by phone 
at +420 220 950 910.

The listed prices are in Euro without VAT. We reserve the right of price alternation. The current prices can be found at www.igmtools.com.
Offer is valid until 28.02.2025.

IGM nástroje a stroje s.r.o. | Ke Kopanině 560, 252 67 Tuchoměřice, Prague, Czech Republic | VAT ID: CZ25114727