Summer DIY Guide: Tips and Tricks for the Workshop

HOW TO MAKE A MORTISE?

5 Ways to Make a Wood Mortise
 
 

IGM Mortising Jig for Classical Rebated Doors Can Be Found at the IGM E-shop

The hollow square mortiser chisels are ideal for production of square mortises. The drill inside a square sleeve first drills a small round hole and the square sleeve then knocks out sharp edges around the hole. The drill is spindle driven whilst the sleeve is stationary.

• Accurate and quick drilling of mortises.
• For classic, wooden and aluminum doors.
• Quick-stops for simple adjustment of length and depth.
• 3 carbide cutters (16, 20 and 22 mm) for a very clean cut.

CMT Mortising drill with cuts from both sides.
Available righthanded and lefthanded.
Ideal for professional production and CNC machining.
For soft and hard wood.
 

HOW TO GLUE SO THAT YOU DON'T GET STICKY?

Check Out These Simple Tips to Make Gluing as Easy as Possible. You Can Find Glues at igmtools.com

IGM Glue Applicator Kit With 13 Attachments Ensures Precise and Clean Wood Gluing
 

IGM Glue Applicator Kit with 13 different nozzles makes gluing wooden parts a piece of cake, whether they are shaped to any profile or joined with dowels or biscuits. The nozzle thread is compatible with Titebond 237 ml plastic bottles.

• Allows an even and easy adhesive application to glued surfaces.
• Roller width 74 mm.
• For water-based dispersive glues.
• Spreader and stand are made of plastic.
• Spare roller included.

• Extremely waterproof glue of superior strength.
• Designed for exterior & interior applications.
• Superior strength, strong initial tack.
• Application in low temperatues possible.

DO YOU HAVE A CNC AT HOME ALREADY?

Start CNC Milling Easily With the New IGM i2R B22!
 

Manufacturing a Child's Chair on CNC? No Problem With the IGM i2R A24!

Small 3-axis CNC router for beginners IGM i2R B22 for wood, plastic, and foams. Milling with a power of 1.5 kW and a range of 610 x 610 mm. The simple UCCNC software allows the router to be controlled even with an Xbox controller.

High-quality original steel stand for the IGM i2R A24 CNC router, designed for mounting a laptop stand and compatible with the IGM toolbox. Includes casters and adjustable feet for high load capacity and stability, ensuring maximum steadiness.

A set of branded aluminum hold-down clamps for i2R CNC routers, designed to fit into the table's T-slot. Suitable for material up to 75 mm thick. This ensures secure clamping, preventing any unwanted movement of the workpiece during milling.

DO IT YOURSELF

Check Out How Easy It is to Make a Great Wall-mounted Bottle Opener That Will Catch Any Cap!

Create Your Own Spice Box and Make Everyone Happy
 

nstant adhesive for gluing small surfaces with hairline cracks, particularly for gluing wood and wood-based materials. The glue is also suitable for other materials such as natural rubber, aluminum, stainless steel, fiberglass, PVC, plastic and porcelain.

Depending on the diameter of the Forstner bit centre shank, the corresponding replaceable guide bush can be mounted. This drill depth stop is used to drill blind holes with Forstner bits where exactly the same drilling depth is required.

• Precise duralumin T-Type ruler.
• Fast and accurate right angle scribing.
• Fast and accurate scribing of parallel lines to the board edge.
• Marking holes every 1 mm.
• Easy to read scale with notches every 5 mm.

How to Make an Endgrain Kitchen Cutting Board?

Do you have a question, do you need advice on something?
Do not hesitate to contact us by e-mail at sales@igmtools.com or by phone 
at +420 220 950 910.

The listed prices are in Euro without VAT. We reserve the right of price alternation. The current prices can be found at www.igmtools.com.
Offer is valid until 30. 09. 2025.

IGM nástroje a stroje s.r.o. | Ke Kopanině 560, 252 67 Tuchoměřice, Prague, Czech Republic | VAT ID: CZ25114727