A Complete Set Of Furniture Manufacturing Tools

How To Build Kitchen Cabinet Doors

Building kitchen panel doors may seem a bit complicated, however, we are sure that with the help of this article and the attached video, it will be a piece of cake.

• Fully adjustable fence.
• Collets 8 and 12 mm.
• Micro adjustment on the outfeed fence.

The JWS-34KX is a combination of two machines, a spindle moulder for cutter heads with a 30 mm spindle and a router table for router bits.

• Heavy duty build for up to 200 kg.
• 16 mm ball bearings.
• Roller support arms 350 x 560 mm.
• Height adjustable from 725 mm up to 1140 mm.
• Foldable stand for comfortable transport.
• Independently adjustable feet.

• Ideal for small and medium spindle routers, surface planers or saws.
• 3 PU rollers of 80 x 30 mm secure excellent non-marking grip.
• Feed rate of 5; 6,5; 8 and 11 m/min.
• Universal stand with 260 mm reach.

• Ideal for router tables, small spindle routers, surface planers, saws and edgebanding tables.
• 3 PU rollers of 76 x 30 mm secure excellent non-marking grip.
• Variable speed, 2 to 12 m/min. plus reverse.
• Unique 3D adjustable arm, with 150 mm depth and 260 mm reach.

• High efficiency and strong torque, save up to 50 % of operating costs.
• For professional routers, planers or saws.
• 3 rollers provide excellent non-marking grip.

• 4 rollers provide excellent non-marking grip.
• Continuous feed rate 2-22 m/min.
• Smart DC Servo Motor 375W with a reverse run.
• State of lubrication indicator.

• Ideal for professional spindle routers, surface planers or saws.
• 4 PU rollers of 120 x 60 mm secure excellent non-marking grip.
• 8 feed rates in a range of
3,5 - 32 m/min.

The cutter head is fitted with two profiling carbide knives. The stop screw is anchored below the knives, offering variable use and improving cutting options of the head.

For upper removal when the profile is routed from the top of the workpiece and bottm, when the profile is routed from the lower side by feeding the material to the router. 

Traditional rabbeting cutter head designed for rabbeting with spindle moulders. The cutter's body is made of hardened duralumin with less weight than steel.
 

• 95 mm cast iron arms.
• Jaw faces remain parallel under pressure.
• Extra large clamping surface.
• Patented non-slip guiding mechanism.
• Swivelling handle to apply maximum pressure.

• High strength dispersion glue.
• Interior use only.
• Short fixation time.
• Strong initial tack - shortens gluing time.
• Bonds stronger than wood.
• Resistant to most solvents.

• Precise aluminum alloy Square 300 x 200 mm.
• Laser marked scales with 1 mm increments.
• Measure both outer and inner edge.
• Handle fitted with cheeks for better stability.

• Tip length 42 mm for marking tight and hard to reach places.
• Push-feed button for easy lead advancement with built-in sharpener.
• Leads 2,8 mm insertable at tip or opposite end.

What is your favorite glue? You can find all Titebond adhesives in our e-shop

Levels, rules, protractors and other equipment for joiners can be found in our e-shop

Do you have a question, do you need advice on something?
Do not hesitate to contact us by e-mail at sales@igmtools.com or by phone 
at +420 220 950 910.

The listed prices are in Euro without VAT. We reserve the right of price alternation. The current prices can be found at www.igmtools.com.
Offer is valid until 31. 5. 2024.

IGM nástroje a stroje s.r.o. | Ke Kopanině 560, 252 67 Tuchoměřice, Prague, Czech Republic | VAT ID: CZ25114727