CMT’s innovative system offers great advantages to all professionals!
The innovative patented FASTX4 system makes the hole saw arbor obsolete. These hole saws have been specifically designed
to ensure maximum productivity, lifetime and performance in all materials. CMT offers a professional range for electricians,
carpenters, builders, kitchen fitters and all related heating, ventilation and plumbing trades.
X1 FAST LOCK
ALL IN ONE CLICK!
We developed a unique patented Fast Lock
System to quickly change between sizes and
types in seconds!
It is the only system that allows the hole saw
and the pilot drill to be changed without tools.
X2 FAST DRILL
FAST DRILLING IN ALL CONDITIONS!
Our hole saws have unique body geometry and
teeth sharpening which provides fast, precise
drilling at Xtreme angles.
- pre-drill at the desired angle
- push the hole saw forward back in position
and complete the hole.
X3 FAST BORE ENLARGEMENT
UNIQUE SOLUTION FOR BORE ENLARGEMENT!
CMT’s has a unique and fast solution to
enlarge your bores. Our innovative pilot drill bit
can fit two hole saws, allowing you to enlarge a
hole in seconds.
X4 FAST PLUG REMOVAL
UNIQUE SOLUTION FOR BORE ENLARGEMENT!
No more screwdrivers or tools!
The plug is effortlessly removed by reversing
the pilot drill bit.
FASTX4 | SYSTEM: THE HOLE SAW REVOLUTION!
MATERIALS: WOOD, SOFT TILES, BRICKS, PLASTER-BOARD, PLASTIC, AERATED CONCRETE
Tungsten carbide-tipped multi-purpose hole saws are
designed for use in a wide variety of materials such as
soft and hardwoods, chipboard, plywood, MDF, plastic,
gypsum/plasterboard, soft tiles (surface hardness
≤6 Mohs), solid brick, brick with cavities, aerated
concrete block, lightweight aggregate block, breeze
block and soft density lime-sandstone building block
(max 30 N/mm2 hardness).
MATERIALS: STAINLESS STEEL, ALUMINIUM, ZINC COPPER
Special tooth geometry with regular pitch provides a smoother cut and better chip clearance preventing clogging and heat build-up. Teeth are alternate
& side set to minimize binding and friction requiring less feed pressure. Ideal for mild steel (up to 1000 N/mm2 strenght), stainless steel, non-ferrous metal, aluminium,
cast iron, copper and galvanized sheet metal.
MATERIALS: HARD STONE, GRANITE, GRES TILES
Diamond dry hole saw with continuous edge have been specially developed for professionals that need to drill in extremely hard materials such as tiles (ceramic, gres, etc.), hard stone (granite, marble, etc.), artifical stone (Okite®, Silestone®, etc.), where it is increasingly difficult to drill with conventional hole saws. These hole saws guarantee excellent performance and superior lifetime even in the hardest materials.
Use in materials and approximate number of drilled holes
The number of holes is approximate. Material type, thickness and speed can affect such performance.
* Not suitable for ceramic tiles
** Use coolant oil
*** Reapply lubricating wax on diameters ranging from 8mm to 16mm