Compact IGM Laguna Fusion1 table saw for wood, ideal for DIYers and craftsmen, equipped with smooth height and tilt adjustments for precise cuts.
• Cast iron table with steel extension wings.
• Smooth and simple tilt and height control.
• Cam lock for quick blade swap.
• Quick-release riving knife mechanism.
• Two T-slots on both sides of the saw blade.
• Can be used with DADO grooving saw blade set.
• Rear table extension included.
• Aluminum alloy motor suspension.
• Movable ON/OFF switch.
The IGM Laguna Fusion 1 table saw is an excellent choice for anyone looking for a small, compact, but accurate and high-quality saw to start with. Ideal for DIYers, model makers or beekeepers, this saw will serve you reliably for many years, delivering a perfect cut each time.
At first sight, the saw draws attention to its large worktable made of cast iron, with wing extension made of thick-walled steel sheet and coated with high-quality, wear-resistant finish. The saw comes with an additional 500 mm rear table extension that you’ll find handy when cutting longer parts. The saw is fitted with a sturdy rip fence that has a handle with a soft plastic grip. The fence slides smoothly along the table and locks firmly in place. An aluminum profile attached to the fence can be flipped by 90 degrees, allowing you to cut thin stock. The fence features a scale reader ensuring clear sight of the scale and absolute precision when cutting with the aluminum profile both in vertical and horizontal position. There are two T-slots in the cast iron part of the table to conveniently use a mitre fence from both sides of the saw blade.
The saw blade movement is controlled by two metal wheels, one to tilt the blade from 0° to 45° and the other to lift the blade up and down as required. The sophisticated dust extraction from the saw collects dust from the bottom of the cabinet and from the top of the saw blade. The top dust extraction located in the blade guard provides clean working area for precise and comfortable cuts. The cabinet is fitted with a 100 mm metal dust outlet.
Despite the lower power of 1100 W, this saw can tackle rip and cross cuts in hard wood up to 79 mm thick. The aluminum alloy motor suspension provides stability, guaranteeing an excellent cut. The throat plate inserted in the cast iron table is suitable for all cutting angles, from 0° to 45, and is fitted with levelling screws for flush alignment with the table. Simple removal of the plate is ensured by a thumb lock. The saw can be equipped with a DADO grooving saw blade set with a bore of 15,87 mm (5/8”).
The saw has many smart features. For example, a quick-release mechanism for simple removal of the riving knife in a single step or a cam lock mechanism that allows you to quickly remove and reinstall the blade. There is a handy tool storage for the rip fence, mitre fence, arbor wrench and push stick, so you'll always have them at hand.
Supplied partially disassembled in a shipping crate on a pallet. Assembly time is approximately 1 hour (two people recommended).
• Type: Fusion 1
• Rating: Craftsman
• Power Input / Output (230V): 1450 / 1100 W
• Blade x Bore: 250 x 30 mm
• Arbor Speed: 3800 RPM
• Blade Tilt: 0–45°
• Max. Depth of Cut at 45°: 56 mm
• Max. Depth of Cut at 90°: 79 mm
• Rip Capacity: 765 mm
• Dust Outlet: 100 mm
• Cast Iron Table Dimensions: 792 x 506 mm
• Total Table Dimensions: 792 x 1116 mm
• Mitre Fence Slot: 19 and 23 mm, T-Slot
• Machine Dimensions (LxWxH): 1550 x 1565 x 1100 mm
• Shipping Dimensions (LxWxH): 1330 x 700 x 790 mm
- Cardboard Box: 1330 x 700 x 790 mm
• Machine Weight: 110 kg
• Shipping Weight: 120 kg
Supplied with:
• Rip Fence
• Mitre Fence
• Push Stick
• Blade Guard for Dust Collection
• Rear Table Extension
• Universal Carbide Saw Blade (diameter 250/30 mm, Z40)
• Hose