• Activator to accelerate the curing of instant adhesives.
• Suitable for Titebond Instant glues.
CA Accelerator for instant cyanoacrylate (CA) adhesives in a spray can. Activator accelerates the curing of Titebond Instant glues and other instant adhesives. Used in conditions unfavorable to the natural curing: dry and cold conditions, when bonding inactive materials or when applying a thick layer of adhesive. This product cannot be used to bond materials that are non-resistant to organic solvents (e.g. polystyrene EPS).
Application: Applied from 20-25 cm on clean and dry surfaces, application temperature range is +10°C to +30°C.
Activator can be applied in two ways:
Small parts: Apply the activator to one bond surface and allow to dry (it remains active for several hours). Then apply the adhesive to the other surface and bind the parts.
Large parts: Apply glue to one surface, bind the parts together and spray the joint with the activator.
Storage: in a tightly closed container, in a cool, dry and dark place (+5°C to +25°C). Do not expose to temperatures below +2°C.
Storage life: Under proper storage conditions, the product is guaranteed to last for 1 year in the unopened original packaging.
The product contains substances classified as dangerous within Regulation (EC) No 1272/2008.
Danger:
Contains: acetone
Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness.
Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid breathing mist/vapours/spray. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Store locked up. Protect from sunlight. Do no expose to temperatures exceeding 50 °C. Dispose of contents/container to by disposing in a hazardous waste receptacle.
Repeated exposure may cause skin dryness or cracking.
UFI: KKJW-WM2G-V10F-VYTV