Titebond Instant Thin is a thin cyanoacrylate instant glue with low viscosity and a short cure time.
- Extremely resistant instant glue for most common materials.
- Suitable for quickly fixing parts, repairing hairline cracks, and loose veneer edges.
- High strength and impact resistance.
- Excellent heat and solvent resistance.
Titebond Instant Thin is a fast-curing glue with a short assembly time and open time. This instant glue is suitable for bonding parts that are difficult to clamp. Thanks to its lowest viscosity, it is ideal for repairing hairline cracks and small defects in wood, or for repairing loose veneer edges.
The different types of Titebond Instant glue vary in viscosity and setting speed. These instant glues are suitable for bonding small surfaces with narrow gaps, particularly for bonding wood and wood-based materials, but also many other materials such as natural rubber, aluminium, stainless steel, fibreglass, PVC, plastics and porcelain. The bonded joint is paintable, stronger than wood, and thanks to the glue's formula, extremely impact-resistant. The glue can be cleaned with acetone, sands and finishes well, and remains resistant to solvents and heat after drying.
Volume: 59 ml
Use: Wood, MDF, leather, plastic, ceramic, most porous materials
For a strong bond, we recommend using the glue together with a CA glue accelerator, which reduces absorption of the glue into the material and speeds up curing.
- Type: Cyanoacrylate
- Use: Interior
- Colour in Liquid State: Transparent
- Colour after Drying: Transparent
- Open Time: 5 seconds
- Assembly Time: 3 seconds (Using a CA glue accelerator)
- Initial Cure: 15 seconds (Using a CA glue accelerator)
- Full Cure: 8 hours (can be shortened by using a CA glue accelerator)
- Operating Temperature: 13-29°C
- Storage: 24 months in a tightly closed bottle stored between 16-27°C
ATTENTION: This adhesive bonds extremely fast. Use protective equipment when handling this glue. Keep out of the reach of children.
Hazard statements:
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary statements:
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P264 Wash hands and affected body parts thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves.
P337+P313 If eye irritation persists: Get medical advice/attention.
P405 Store locked up.
P501 Dispose of contents/container by handing over to the person authorized to dispose of waste or by returning to the supplier.
ATTENTION
DANGER: COMBUSTIBLE LIQUID. Bonds skin, eye, and other tissue instantly. Contains ethyl-2-cyanoacrylate. Irritating to eyes, skin, and respiratory tract. Do not allow eye or skin contact. Avoid breathing vapors. Do not swallow. Keep away from sources of heat.
FIRST AID: For eye contact, do not force eyes open. Flush eyes with water for 15 minutes and seek medical attention immediately. For skin contact, flush contact area with water and seek medical attention. If inhaled, remove to fresh air. Seek medical assistance if symptoms persist. Refer to Safety Data Sheet for additional information.
Not for use on products in contact with food items. Please use Titebond III Premium Wood Glue or Titebond II Ultimate Wood Glue for items used for indirect food contact.
KEEP OUT OF REACH OF CHILDREN.