IGM Pocket Hole Jig Single

The IGM Pocket Hole Jig for hidden screw joints ensures neat connections of wooden workpieces. Made from hardened steel with a magnet for easy clamping. Includes a drill bit, driver bit, and depth stop.

• For quick and easy pocket hole joints.
• Drill guide made of hardened steel stays firmly in place.
• With drill bit, driver bit and stop collar.
• Flat top with a magnet for easy clamping.

With the IGM Pocket Hole Jig you can make a strong joint of wooden boards, for example when building cabinets or other furniture. The jig is used to drill pocket holes quickly and easily with a drill. The drill guide made of hardened steel drives the 9,5 mm HSS drill bit into a material 12 – 40 mm thick. Use the scale on the bottom of the jig to adjust the stop collar according to the thickness of the material. Then, set the drill guide in the correct position according to the measured thickness. A magnet and notches in the jig’s body hold the guide firmly in place. The Robertson square bit #2 drives pocket hole screws into the predrilled pocket hole. By rotating the lug, you can use the jig to make a new joint or to strengthen an existing joint, such as a mitre joint. To avoid awkwardly holding the drill guide by hand when using Pocket Hole clamp, the flat top of the jig is fitted with a magnet.

Package Contents:
• Single Drill Guide
• HSS Drill Bit 9,5 mm
• Robertson Square Driver Bit #2
• Stop Collar
• Hex Key 3 mm

 

Material Thickness (from - to)	Screw Length	Coarse Thread Screws for Softwood (code)	Fine Thread Screws for Hardwood (code)
12 - 16 mm	25 mm	LES-PHS25C	LES-PHS25F
17 - 20 mm	32 mm	LES-PHS32C	LES-PHS32F
21 - 26 mm	38 mm	LES-PHS38C
27 - 34 mm	50 mm	LES-PHS50C
35 - 40 mm	63 mm	LES-PHS63C