IGM Pocket Hole Jig Double, Kit

IGM pocket hole jig for creating hidden screw joints. The practical set in a plastic storage box includes a drill bit, driver bit, depth stop, and 50 screws. Convenient magnet on the jig for easy clamping with a clamp.

• For quick and easy pocket hole joints.
• Drill guide made of hardened steel stays firmly in place.
• Double drill guide for stronger joints.
• With drill bit, driver bit, stop collar and screws.
• Flat top with a magnet for easy clamping.
• Supplied in a handy case.

With the IGM Pocket Hole Jig you can make a strong joint of wooden boards, for example when building cabinets or other furniture. The jig is used to drill pocket holes quickly and easily with a drill. The drill guide made of hardened steel drives the 9,5 mm HSS drill bit into a material 12 – 40 mm thick. Two guides allow you to make an even stronger joint with no need to move the jig around. Use the scale on the bottom of the jig to adjust the stop collar according to the thickness of the material. Then, set the drill guide in the correct position according to the measured thickness. A magnet and notches in the jig body hold the guide firmly in place. The Robertson square bit #2 drives pocket hole screws into the predrilled pocket hole. This kit includes five different screw sizes, 10 pieces each. By rotating the lug, you can use the jig to make a new joint or to strengthen an existing joint, such as a mitre joint. To avoid awkwardly holding the drill guide by hand when using Pocket Hole clamp, the flat top of the jig is fitted with a magnet. The jig with accessories is supplied in a handy case with a manual.

Package Contents:
• Double Drill Guide
• HSS Drill Bit 9,5 mm
• Robertson Square Driver Bit #2
• Stop Collar
• Hex Key 3 mm
• Pocket Hole Screws – 4 x 25 mm, coarse thread, pan head, 10 pcs
• Pocket Hole Screws – 4,5 x 32 mm, coarse thread, washer head, 10 pcs
• Pocket Hole Screws – 4,5 x 38 mm, coarse thread, washer head, 10 pcs
• Pocket Hole Screws – 4,5 x 50 mm, coarse thread, washer head, 10 pcs
• Pocket Hole Screws – 4,5 x 63 mm, coarse thread, washer head, 10 pcs
• Manual

 

Material Thickness (from - to)	Screw Length	Coarse Thread Screws for Softwood (code)	Fine Thread Screws for Hardwood (code)
12 - 16 mm	25 mm	LES-PHS25C	LES-PHS25F
17 - 20 mm	32 mm	LES-PHS32C	LES-PHS32F
21 - 26 mm	38 mm	LES-PHS38C
27 - 34 mm	50 mm	LES-PHS50C
35 - 40 mm	63 mm	LES-PHS63C