IGM Double pocket hole jig for fast, secure drilling of hidden joints without complex setup. Durable steel guide with a strong magnet hold for easy clamping. Ideal for neat connections of wooden parts in furniture making and other woodworking projects.
• For quick and easy pocket hole joints.• Drill guide made of hardened steel stays firmly in place.• Double drill guide for stronger joints.• With drill bit, driver bit and stop collar.• Flat top with a magnet for easy clamping.With the IGM Pocket Hole Jig you can make a strong joint of wooden boards, for example when building cabinets or other furniture. The jig is used to drill pocket holes quickly and easily with a drill. The drill guide made of hardened steel drives the 9,5 mm HSS drill bit into a material 12 – 40 mm thick. Two guides allow you to make an even stronger joint with no need to move the jig around. Use the scale on the bottom of the jig to adjust the stop collar according to the thickness of the material. Then, set the drill guide in the correct position according to the measured thickness. A magnet and notches in the jig body hold the guide firmly in place. The Robertson square bit #2 drives pocket hole screws into the predrilled pocket hole. By rotating the lug, you can use the jig to make a new joint or to strengthen an existing joint, such as a mitre joint. To avoid awkwardly holding the drill guide by hand when using Pocket Hole clamp, the flat top of the jig is fitted with a magnet.
Package Contents:• Double Drill Guide• HSS Drill Bit 9,5 mm• Robertson Square Driver Bit #2• Stop Collar• Hex Key 3 mm
| Material Thickness (from - to) | Screw Length | Coarse Thread Screws for Softwood (code) | Fine Thread Screws for Hardwood (code) |
|---|
| 12 - 16 mm | 25 mm | LES-PHS25C | LES-PHS25F |
| 17 - 20 mm | 32 mm | LES-PHS32C | LES-PHS32F |
| 21 - 26 mm | 38 mm | LES-PHS38C | |
| 27 - 34 mm | 50 mm | LES-PHS50C | |
| 35 - 40 mm | 63 mm | LES-PHS63C | |