The M9000 carbon filter for MFlux5 effectively removes odors and fumes, ideal for engraving and cutting lasers. Contains activated carbon and potassium hydroxide, with a 4000-hour lifespan, easy to install.
● Carbon filter for efficient filtration of odours and smoke.
● Perfect for engraving and cutting lasers.
Spare carbon filter M9000 for MFlux 5 air filter. Carbon filters efficiently eliminate odours and smoke. Sold as 1pc. The modular box contains two carbon filters. We recommend replacing both filters at the same time.
The filter M9000 contains activated carbon and potassium hydroxide that attract gas molecules and trap odours. This filter is particularly useful for eliminating smoke from engraving and cutting lasers. The filter service life is 4000 operating hours.
The table below compares the efficiency of filters M3000 and M9000 on a scale of 0-10 (low efficiency 0, high efficiency 10):
| Compound | Filter M3000 | Filter M9000 |
|---|
| VOC (volatile organic compounds) | 8 | 6 |
| Ozone | 10 | 10 |
| Nitrogen dioxide | 6 | 9 |
| Nitric acid | 6 | 9 |
| Acid/corrosive (HCl, HF, chlorine) | 0 | 8 |
| Alkaline/corrosive (ammonia, amines) | 0 | 0 |
| Corrosive gases (sulphane) | 1 | 10 |
| Corrosive gases (sulphur dioxide) | 7 | 9 |
| Corrosive gases (organosulphur compounds) | 5 | 9 |
Check filter position. The correct position is indicated on the filter side.
Package Contents:
● Carbon Filter M9000