The rabbeting router bit is equipped with a guide bearing D = 12,7 mm for rabbet width of H = 22 mm.
For use on router table only.
There are optional guide bearings available for this router which will allow you to make rabbets of various widths (H).
For the optional bearings, it is necessary to purchase a set containing a long screw F099-46300. Alternatively, you can buy an upper washer C54155200 and a long screw (see table).
Bearing code | Bearing size D = outer radius d = inner radius | Rabbet depth (H) | washer (included) | washer (accessory) | screw (included) | long screw (accessory) |
F079-00300 | D12,7 d4,76 | 22 | F099-42300 | | F099-05800 | |
F079-01800 | D15,8 d4,76 | 20,6 | F099-42300 | | F099-05800 | |
F079-01900 | D19 d4,76 | 19 | F099-42300 | | F099-05800 | |
F079-01700 | D22,2 d4,76 | 17,4 | | C54155200 | F099-05800 | |
F079-01400 | D28,5 d4,76 | 14,25 | | C54155200 | F099-05800 | |
F079-01600 | D34,9 d4,76 | 11,05 | | C54155200 | | C99005900 |