The IGM terrace board installation jig enables easy installation without visible joints. For boards 90–150 mm wide with adjustable spacing between boards. Ensures a strong and aesthetic joint.
• Build a wonderful deck without visible joints.
• Simple and quick joining of decking boards and decking frame.
• For boards 90 – 150 mm wide.
• Adjustable spacing between boards – 3,5 mm, 4,5 mm, 5,5 mm.
IGM Decking Jig helps you build a wonderful deck without visible joints in the decking boards. The jig is designed for 90 – 150 mm wide boards. Set the desired width according to the scale on the jig and secure it directly on the board by pressing down on the handle. Spacing between boards is 3,5 mm. You can increase spacing to 4,5 mm or 5,5 mm by using included 1 mm and 2 mm spacers. The guide bush drives the screw into the side of the board at a 50° angle, which not only makes your deck aesthetically pleasing, but also prolongs the life and quality of the joint. Less water can penetrate the concealed joint, which slows down the process of rotting compared to screws driven directly into the board surface. The Torx bit T15, with a hex shank for quick release chucks, drives the screw smoothly into the material and is securely stored in the handle. After screwing from both sides, simply lift the red lever up to release the jig and secure it in another spot.
We recommend using IGM Decking Screws with this jig.
Package Contents:
• Decking Jig
• 2x Spacer 1 mm
• 2x Spacer 2 mm
• Torx Bit T15