A cyclone separator for sawdust and chips for extractors and collectors reduces costs and extends filter lifespan. The package includes 63 mm suction hoses. Compatible with all types of workshop extractors and collectors.
• Chip and dust separator for your extractor.
• Saves the cost of extractor bags and extends the life of extractor filters.
• Compatible with all dust extractors with 63 mm suction hoses.
The IGM CS63 Dust Separator deflects wood chips and dust in a waste bucket,reducing damage to your dust extractor,extending the life of filters and minimizing filling of the extractor bag.The separator connects between your dust extractor and power tool or router table,or only to the dust extractor when cleaning your workshop.Featuring a simple design,simply attach the elbow to the underside of the lid and fit to the waste bucket.This seals the bucket and creates a vacuum after the extractor is switched on,leaving most of the collected waste in the bucket.
The separator contains two plastic flexi hoses with a diameter of 63 mm for connection to the extractor and power tool.The flexi hose is attached to the lid by a 63 mm coupler with thread for a firm connection.The hose can be connected to the extractor either with the 63 mm coupler or with a wire hose clip.The second hose then connects to your power tool,is used to clean your workshop or can be replaced by the 63/36 mm reducer.This reducer allows to connect a 36 mm hose,such as the Festool suction hose,directly to the lid.The separator is primarily designed for dust extractors,but it can also be connected to a dust collector using a 63/100 mm reducer to attach a 100 mm extraction hose clamped with a hose clip.
Warning! Open the air inlet valve on the handle of your dust extractor when cleaning floors,otherwise the waste bucket could be deformed.
Warning! Make sure the elbow does not face the middle hole,otherwise the separator will work incorrectly.
• Bucket Volume: 32 l
Package Contents:
• Waste Bucket
• Lid with Holes
• 2x Flexi Hose 63 mm
• Elbow
• 3x Coupler 63 mm
• Reducer 63/100 mm
• Reducer 63/36 mm
• Wire Hose Clip 63 mm
• Wire Hose Clip 100 mm