The Set includes:
• 4 carbide tipped cutters Z = 3; I = 3,2–4–4,8–6,4 mm
• A shank
• A 22mm ball bearing
• 17 shims in different sizes (8x 0,1 mm, 4x 0,5 mm, 3x 1 mm a 2x 4 mm)
The Carbide edges of the cutters should never touch; arrange the shims as illustrated below. Use only the thicknesses provided in the set. Be sure all cutters are assembled in the proper right rotational direction below. Looking down the arbor the cutters will turn clockwise.